Ammonia Air Handling Unit |
| |
- The air cooling unit is the very vital part for its performance in cold storage and other relative applications.
- It provides much higher rate of ammonia gas evaporation than compared to bunker coils or diffusers.
|
| |
Standard Features |
| |
- The cooling coil is constructed with hot dipped galvanized tubes and spiral fins.
- Tubes are placed in the direction of the air flow to ensure maximum air turbulence and hear transfer efficiency.
- Suction and over feed liquid connections are supplied with 150 pound flanges with companion flanges and isolation kits.
- Tongue and groove flange design is standard: raised face is optional. The drain pan is constructed of heavy gauge galvanized steel and shipped in the place of the unit.
- All pans are smooth surfaced, sloped end to end assure rapid and complete drainage.
- Fan motors are three phase, ball bearing, 1440 RPM with internal thermal overload protection. Low temperature grease is provided.
- Direct drive axial propeller fans are of heavy duty construction.
|
| |
Technical Specifications |
| |
| Capacity Ratings are in Kcal/hrs; Evaporative Temp:0° C |
| |
| MODEL |
CAPACITY
KCal/ hrs |
PIPE SIZE |
CASING GAUGE SIZE |
FAN SIZE |
NO. OF FAN |
DIMENSION |
| L |
W |
B |
| KF 25 |
10000 |
¾" |
18 |
18" |
1 |
4.5' |
3' |
3' |
| KF 50 |
20000 |
¾" |
18 |
16" |
2 |
6' |
3' |
3.5' |
| KF 75 |
30000 |
¾" |
18 |
18" |
3 |
8.5' |
3' |
3.5' |
| KF 100 |
40000 |
¾" |
18 |
16" |
4 |
10' |
3' |
3.5' |
|
| |
| |
|
