Manufacturer and Exporter of Ammonia Compressors, Cold Room Plants, Ice Making Plants and Water Chilling Plants for Industrial Refrigeration Applications.
AN ISO 9001:2008 Company, INDIA
Industrial Ice Making Plant  
Large Image
Large Image
Industrial Ice Making Plant
Cooling Coil Evaporator
Chilling Tank

Industrial Ice Making Plant

Neer Enterprises Pvt. Ltd. offer State-Of-The-Art industrial ice making plant right from the plant layout, designing of the plant, manufacturing customized plant machinery, to meet exact requirements of the plant backed by prompt customer support.

Neer Enterprises Pvt. Ltd. offers Ice Making Plant with capacity of 5 Tons to 500 Tons and more Ice per day.

The complete ice making plant consists of:

Electrical Equipments

Ammonia Compressors:

  • Ammonia compressors designed with state-of-the-art technology for industrial & commercial refrigeration and low temperature applications.
  • Compressors are V belt driven and are suitable to operate with Ammonia (NH3) & Freon [12 (CCl2F2), 22 (CHClF2)] as refrigerant.
  • Robust construction, excellent performance and power saving features and hallmarks of the products.

Condensers / Heat Exchangers:

Condenser is a heat transfer surface, generally which are divided in to three types.
  • Air Cooled Condenser : Employ air as the condensing medium.
  • Water Cooled Condenser : Utilize water to condense the refrigerant.
  • Evaporative Condenser : Use both air and water as the condensing medium. The function of the air is to increase the rate of evaporation by carrying away the water vapor results from evaporation process.

Ammonia Receiver :

  • Ammonia receiver can control the supply and demand relation between the condensers and the evaporator, prevent excessive liquid ammonia from staying in the condenser, maintain a certain level in the liquid receiver to prevent gas from going into the liquid pipe line.
  • The ammonia in the system can be stored in the ammonia receiver to avoid loss of the ammonia before the refrigerating system is repaired. Therefore, the volume of the ammonia storage should be considered before buying it.

Cooling Coil / Evaporator

  • Cooling Coil / Evaporator is used as heat transfer surface in which a volatile liquid is vaporized for the purpose of removing heat from refrigerated space.
  • V shape cooling coils are available in different sizes, usually custom made to the individual applications.

Chilling Tank

Chilling Tank consists of three parts:
1) Ice Tank
2) Insulation of Ice Tank
3) Ice Block
  • Ice Tank:
    Ice tanks are made of such material as wood, steel or concrete. As wooden tanks do not last long enough and are liable to leak, they should preferably be made of steel well coated with waterproof paint. Tanks made of reinforced concrete are also recommended as superior to those of wood.

    The ice tank contains the direct expansion coils, equally distributed throughout the tank and these coils are submerged in brine. The tank is provided with a suitable frame of hard wood for support the ice cans and a propeller or agitator for keeping the brine in motion: the brine in the tank acts as a medium of contact only, the ammonia evaporating in the ice coils extracts the heat from the brine, which again absorbs the heat for the water in the cans.

    The tank itself should not be much larger than is necessary to hold the cans, the coils, and the agitator. About two inches should be left between the moulds and three inches between the pipes and the moulds.
  • Insulation of Ice Tank:
    Insulation of the ice tank is accomplished by using twelve to eighteen inches of good insulating material on each of the sides and not less than twelve inches under the bottom.

  • Ice Block:
    Commercial sizes of Ice cans vary with the weight of ice cakes required. The cans are made to contain about 5% more than their rated capacity to compensate for thawing.

Paneling (Electrical Equipments) :

The Neer Ice making plant is furnished with electrical control panel with compressor starter, all necessary safety switches and pressostats, Voltmeter, Ammeter, Temperature Sensor etc.

How we operate:



Ice Making plants are used in different applications like:
  • Fisheries
  • Hospital
  • Chemical
  • Pharmaceutical
  • Commercially used in different industrial applications
<< Ammonia Valve Fittings TOP Block Ice Makers >>
Copyright © 2009, Neer Enterprises Pvt. Ltd. All rights reserved.